Hints for recovering data from RAID-5 unit

Saturday, December 11, 2010

RAID technology is the use of multiple disks to emulate the operation of a disk. This rule is designed to increase data security and redundancy, fast read / write, or a mixture of both. A great value in the management of corporate data.

The data are part of the economy. Information is power and the right to be full, especially considering the nature of the modern global economy in this age group we callInformation Age.

This has led to the explosion of information and integration of communication in most companies. Most companies use some type of information system that stores sensitive information critical to a wide range of operations.

These systems can be reliable, especially as technology increases the amount and accuracy of the information stored in different media and systems. However, the probability of these systems to crash or data loss can not beignored.

Most accidents occur when a physical error or logical data is a set of system-inch hard drives, CD-ROM drives, tape drives and other storage media and can eventually fail. Outages, physical damage to media, head crashes, motor problems and others - that could be caused by many reasons.

Whatever the reason, you need a way to restore all data. This is especially true if for some reason, destroyed or damaged data deletedcontains information that is not supported in any way, or anywhere else.

Special attention in planning the backup strategy is the type of storage they occupy. If you register with a RAID, and access your data for you, you must remember a few additional tips for managing data of general education.

1. Regular maintenance - During the RAID components are generally reliable, it is recommended that regular backupsperformed at specific intervals. There is always the possibility that problems in the logic of these systems and continuity. For this purpose, special software, maintain the integrity of the RAID configuration remains.

2. Know your problem - maybe a small difference in the formation are unknown, but many problems can be solved with rescue tools, high-availability RAID support RAID. Check to see if the software does not work, then you can 'The professional services of professional data recovery.

These experts are well trained and use of the team is not easy for many people on the disks available to repair the damage and the media desperately wrong.

3. If possible, use software RAID instead of hardware RAID - RAID while the software is a real alternative to hardware RAID. Software RAID has some practice setbacks.

Software RAID is not as good as a hardware RAID. There may be errors magnetbut is much less reliable than hardware RAID

Also, software RAID is to undertake system resources and requirements before they can be used. This is not the RAID software should avoid like the flu, is that the juice is a good reason to use RAID hardware in place

4. Invest in maintenance - for the use of precious hours to ensure and maintain your RAID can be difficult to prove and useless by any means, just lookdata recovery professionals to realize the bill was worth it.

0 comments: